top of page
도서관의 Topview

Publications
Advanced Mechatronics Laboratory

International Journal Papers

2024

​

  • Lee, H. H., Yoon, K. T., Lim, H. H., Lee, W. K., Jung, J. H., Kim, S. B., & Choi, Y. M. (2024). A Novel Passive Shoulder Exoskeleton Using Link Chains and Magnetic Spring Joints. IEEE Transactions on Neural Systems and Rehabilitation Engineering. [Link]

2023

​

  • Yoon, K. T., & Choi, Y. M. (2023). Modeling and Tolerance Analysis of Compliant Mechanism for Axis-Symmetric Mass Comparator. IEEE/ASME Transactions on Mechatronics. [Link]

  • Kim, T. H., Noe, S. H., Choi, Y. M., & Lee, H. J. (2023). Vibration-Damped Tool Holders in Industrial Robotic Machining Systems. International Journal of Precision Engineering and Manufacturing, 24(9), 1535-1548.[Link]

2022

  • Kang, S., Jeong, Y. G., & Choi, Y. M. (2022). Design of a Finger-Sized Voice Coil Motor for High-Speed Scanners. International Journal of Precision Engineering and Manufacturing, 1-9. [Link] 

  • Yoon, K. T., Choi, Y. M. (2022). Biomechanical Regenerative Braking Energy Harvester: A Systematic Analysis. International Journal of Precision Engineering and Manufacturing-Green Technology,
    10, 437-456. [Link] 

  • Yoon, K. T., Lim, H., Bae, J. H., Lee, W. K., Kim, D., & Choi, Y. M. (2022). Novel Multi-Electromagnetic-Force-Compensation Weighing Cell With Axis-Symmetric Structure. IEEE/ASME Transactions on Mechatronics, 27(6), 6018-6023. [Link]

  • Kim, J., Choi, Y. M., Okamoto, K., & Jo, B. (2022). Prediction of buckling failure load of 304 stainless-steel column at elevated temperatures using lead–antimony alloys. Engineering Failure Analysis, 106480. [Link]

  • Lim, H. H., Choi, Y. M. (2022). Enhanced generalized modeling method for compliant mechanisms: Multi-Compliant-Body matrix method. Structural Engineering and Mechanics, 82(4), 503-515. [Link]

2021

  • Nguyen, T. S., Lee, S. H., Kim, G. E., Kwon, S., Kim, K. R., Park, P. W., Kim, K. Y., Kim, S. H., Choi. Y. M., & Kim, K. (2021). Force uniformity control for large-area roll-to-roll process. Review of Scientific instruments 92.10: 103906. [Link]

  • Lee, H. H., Yoon, K. T., & Choi, Y. M. (2021). CHECKWEIGHER USING AN EMFC WEIGHING CELL WITH MAGNETIC SPRINGS AND AIR-BEARINGS. Metrology and Measurement Systems, 28.3. [Link]

  • Kim, E. J., Kim, H., Park, E., Kim, T., Chung, D. R., Choi, Y. M., & Kang, M. (2021). Based Multiplex Surface-Enhanced Raman Scattering Detection Using Polymerase Chain Reaction Probe Codification. Analytical Chemistry, 93(8), 3677-3685. [Link]

2020

  • Yoon, K. T., Park, S. R., & Choi, Y. M. (2020). Electromagnetic force compensation weighing cell with magnetic springs and air bearings. Measurement Science and Technology, 32(1), 015905. [Link]

  • Choi, Y. M., Yoo, H., & Kang, D. (2020). Large-area thickness measurement of transparent multi-layer films based on laser confocal reflection sensor. Measurement, 153, 107390. [Link]

  • Kang, S., Lee, M. G., & Choi, Y. M. (2020). Six degrees-of-freedom direct-driven nanopositioning stage using crab-leg flexures. IEEE/ASME Transactions on Mechatronics, 25(2), 513-525. [Link]

  • Ahn, D., Kim, H., Choi, K., Choi, Y. M., & Lim, J. Y. (2020). Design process of square column-shaped voice coil motor design for magnetic levitation stage. International Journal of Applied Electromagnetics and Mechanics, 62(3), 517-540 [Link]

2019

  • Xing, J., Kang, S. H., Choi, Y. M., Lee, S., & Yoo, H. (2019). High-speed line-scan confocal Raman microscope with enhanced diffraction efficiency. Measurement Science and Technology, 31(2), 025203. [Link]

  • Sung, E., Seo, C. H., Song, H., Choi, B., Jeon, Y., Choi, Y. M., ... & Lee, M. G. (2019). Design and experiment of noncontact eddy current damping module in air bearing–guided linear motion system. Advances in Mechanical Engineering, 11(8), 1687814019871424. [Link]

2018

  • Hong, D., Choi, Y. M., & Jeong, J. (2018). Test bed for contact-mode triboelectric nanogenerator. Review of Scientific Instruments, 89(6), 065110. [Link]

  • Lee, H. J., Woo, S., Park, J., Jeong, J. H., Kim, M., Ryu, J., ... & Choi, Y. M. (2018). Compact compliant parallel XY nano-positioning stage with high dynamic performance, small crosstalk, and small yaw motion. Microsystem Technologies, 24(6), 2653-2662. [Link]

  • Hong, D., Choi, Y. M., Jang, Y., & Jeong, J. (2018). A multilayer thin‐film screen‐printed triboelectric nanogenerator. International Journal of Energy Research, 42(11), 3688-3695. [Link]

  • Kim, Y. S., Dagalakis, N. G., & Choi, Y. M. (2018). Optical fiber Fabry-Pérot micro-displacement sensor for MEMS in-plane motion stage. Microelectronic engineering, 187, 6-13. [Link]

2017

  • Jeong, J. H., Ahn, D., Kim, K., Choi, Y. M., Kim, M., Lee, H. J., ... & Gweon, D. G. (2017). Feedforward compensation of back electromotive force for suppressing rotational motion errors in a magnetically levitated system. Journal of Mechanical Science and Technology, 31(10), 4619-4630. [Link]

  • Choi, Y. M., Lee, M. G., & Jeon, Y. (2017). Wearable biomechanical energy harvesting technologies. Energies, 10(10), 1483. [Link]

  • Choi, Y. M., Kang, D., Lim, S., Lee, M. G., & Lee, S. H. (2017). High-precision printing force control system for roll-to-roll manufacturing. IEEE/ASME Transactions on Mechatronics, 22(5), 2351-2358. [Link]

  • Kim, I., Woo, K., Zhong, Z., Lee, E., Kang, D., Jeong, S., ... & Moon, J. (2017). Selective light-induced patterning of carbon nanotube/silver nanoparticle composite to produce extremely flexible conductive electrodes. ACS applied materials & interfaces, 9(7), 6163-6170. [Link]

2016

  • Choi, Y. M., Ahn, D., Gweon, D. G., & Lee, M. G. (2016). Design of a rectangular-type voice coil actuator for frame vibration compensation. Journal of Magnetics, 21(3), 348-355. [Link]

  • Kim, G. E., Woo, K., Kang, D., Jang, Y., Choi, Y. M., Lee, M. G., ... & Kwon, S. (2016). A study on the enhancement of the reliability in gravure offset roll printing with blanket swelling control. Journal of Micromechanics and Microengineering, 26(10), 105014. [Link]

  • Zhong, Z., Lee, H., Kang, D., Kwon, S., Choi, Y. M., Kim, I., ... & Moon, J. (2016). Continuous patterning of copper nanowire-based transparent conducting electrodes for use in flexible electronic applications. ACS nano, 10(8), 7847-7854. [Link]

  • Zhong, Z., Woo, K., Kim, I., Hwang, H., Kwon, S., Choi, Y. M., ... & Moon, J. (2016). Roll-to-roll-compatible, flexible, transparent electrodes based on self-nanoembedded Cu nanowires using intense pulsed light irradiation. Nanoscale, 8(16), 8995-9003. [Link]

Domestic Journal Papers (Rep.of Korea)

2021

  • Bae, J. H., Yoon, K. T., Lim, H. H., Choi, Y. M. (2021). Development of an Optical Position Sensor for High-Precision Electromagnetic Force Compensation Balance. Journal of the Korean Society for Precision Engineering, 38(8), 567-574. [Link]

2018

  • Lee, S. H., Jo, J., Kim, K. Y., & Choi, Y. M. (2018). Recent Research Trend of Micro Hot-Embossing. Journal of the Korean Society for Precision Engineering, 35(11), 1027-1034. [Link]

2017

  • Jo, J., Kim, W., Kim, K. Y., & Choi, Y. M. (2017). Focused-Infrared-Light Assisted Roll-to-Roll Hot Embossing. Journal of the Korean Society for Precision Engineering, 34(3), 199-203. [Link]
     

2023

  • Yoon, K. T., Bae, J. H., Choi, Y. M. (2023). Practical Gravimetric Flow Rate Measurement Method for Slot-Die Coating Uniformity Evaluation. Journal of the Korean Society for Precision Engineering, 40(2), 105-111 [Link]

bottom of page